rI know a very good buried scraper conveyor manufacturer, Tianrun Environmental Protection. Tianrun Environmental Protection is a manufacturer specializing in the production of scraper conveyors. Tianrun scraper conveyors are made of high-quality raw materials and are strong and durable. , and Tianrun dust removal scraper conveyor has a one-year warranty and perfect after-sales service, so you have no worries.
rDaily maintenance of scraper conveyor
rBased on the structural characteristics of scraper conveyor and combined with practical experience, daily maintenance should be carried out from nine aspects
< b /> r① Frequently check whether the operation is normal and whether there is any abnormal noise. If any fault is found, stop the machine and eliminate it in time.
r② During operation, be careful not to mix large pieces of iron or hard objects into the tank to avoid damaging the machine.
r③Regularly remove hemp ropes and other debris in the scraper conveyor to avoid overloading the motor and damaging the motor and reducer after being entangled in the chain.
r④ Check whether the chain pin is broken or loose, replace or repair it in time, and check whether the scraper is damaged or worn. If there is a bent, deformed or missing scraper, replace or repair it in time. Scratches or grooves on the polyethylene scraper may indicate other problems.
r⑤ Check the chain roller and sprocket for excessive wear.
r⑥ Strictly follow the manufacturer's product instructions and regularly lubricate bearings, gears, reducers, etc.
r⑦ Regularly check all safety protection devices to ensure that they can work reliably.
r⑧ Regularly check the tightness of all bolted connections, and tighten them in time if they are found to be loose.
r⑨ Check and adjust the tension of the drive belt or chain frequently.
rFor scraper conveyors, maintaining proper chain tension is one of the most critical daily maintenance tasks. The scraper conveyor chain should be neither too tight nor too loose. Too tight a scraper conveyor chain can easily cause premature wear, as well as problems with chain sprockets and bearings. Insufficient chain tension may cause chain breakage. If the scraper conveyor chain is not tight enough, it may catch on the rollers or guide rails and be damaged.
When the scraper conveyor is operating normally, the scraper conveyor chain should generally have a little slack. There should generally be a chain sag of ~ between the rollers of a roller return conveyor. For guide rail type or chain trough type return conveyors, when the chain comes down from the head gear, there should be a little chain sag, usually ~. After the scraper conveyor chain has been running for a period of time, it will slowly become longer or sag, and the scraper may snag the guide rail or the chain support groove, so check it frequently to prevent this from happening. Although the scraper conveyor has good reliability, it must be maintained and maintained regularly to ensure its effective operation.
Telephone
Mobile phone
Company address Xihuan Industrial Park, Botou City, Hebei Province
Buried scraper conveyor is produced by high quality buried scraper conveyor manufacturer